Tutorial #8 – Install a TV Tuner
Sunday, February 28th, 2010Level 1
Here, I will teach you how to Install a TV Tuner.
Video part of Tutorial
Archive for the ‘Level 1’ Category
Tutorial #7 – Record Speaker Audio
Thursday, February 25th, 2010Today, I will teach you how to record speaker audio with a speaker, headphone splitter, and a 3.5mm to 3.5mm cable. Sorry for posting later than usual. I was very busy. Had to put braces on, watched the 3D version of Avatar (It was so boring, I could have recorded Tutorial #7 then instead), and my sister had a playdate and they used the camera I use for tutorials. Also, I went back to 16:9 for tutorials and changed my site’s playback format to Flash Video (Tutorials 1-6 will use the VCD quality videos, Tutorial 7+ will use 480*270 for YouTube and other sites), and my voice got deeper.
Text Edition
- Get a Speaker, 3.5mm to 3.5mm cable, and a Earphone splitter
Plug in your Earphone splitter to the Earphone jack
Plug one end of the 3.5mm to the earphone splitter
Plug the other end of the 3.5mm to 3.5mm cable to the Microphone jack
Plug in the speaker to the other plug of the earphone jack- Record a sound with your PC
Video part of tutorial
Tutorial #6 – Paper Clip TV/Radio attena
Wednesday, December 30th, 2009Level 1
Paperclips can make basic TV or Radio attenas. Not good quality but OK for some people. I tried it with a radio.
In the Video, I said I could lisiten to Radio but I don’t do it much.
Video part of Tutorial
Tutorial #1 – Building a Ethernet Cable Tester
Tuesday, November 17th, 2009LEVEL 1
Many sites may tell you how to build a Ethernet Cable Tester, but they may be hard. I will teach you how to build a Ethernet cable tester for you in two easy methods:
Method 1: Computer to Hub/Switch
- Have the Computer and the Switch ready (Both powered on)
- Plug in the Ethernet cable to the Stwitch and the Computer
- Check on the Computer & the Switch if the port is connected
Method 2: Switch and Cable from Port to Port
This is risky and many hubs or switches may support it.
- Make sure the Switch is on
- Also, You have to just plug in a cable from one port to another port and see if the lights are on.
Video form of Tutorial
Method 1
Method 2
Sorry for the bad sound, This is only the first time, and the conversion in 852*480(HQ) and 430*240(LQ) crashed, so I used VCD quality. I may re upload with the fixed version.
Please don’t republish this video without permission. I would manage republishing this.
Most tutorials would be released on a weekend or major holiday, but I had lots of free time, so I published this on Tuesday.